CR2450R

CR2450R - High current type

[Battery type]: Snap type manganese dioxide lithium battery

[Rated voltage]: 3.0V

[Nominal capacity] : 500mAh

[Recommended continuous discharge current value]: ≤3mA

[Operating temperature range]: -20°C to 60°C

[Diameter]: 24.5mm

[Height]: 5mm

[IEC(JIS)] : CR2450R

[Quality] : 6g

[Application Field]: loT/sensor/security tracking equipment, etc

Lightweight, high voltage

The battery voltage is 3V, which is about twice that of dry batteries. Until now, two batteries were required, but now it is enough to use one battery, saving space and reducing weight

Superior discharge stability

It exhibits stable voltage characteristics even after long-term discharge, so it improves the reliability of the equipment used and saves the maintenance of battery replacement.

The pulse discharge current is about twice that of the original

Compared with the "standard type", the "high-current type" maintains a high current value even if the discharge is accelerated. The large pulse discharge current*1 is increased to 35mA, which is about twice that of the "standard type". LPWA communication equipment such as "LoRa", which previously made it difficult to use lithium button batteries, with a high peak current, can also be used*2.

*1 It can be discharged at a voltage of 2V or more (3 seconds) at a high current value of 23°C when discharged to 50% of the nominal capacity

*2 May vary depending on the usage environment and usage conditions

The discharge time of capacity utilization is about three times that of the conventional one*3

Compared to the standard type, the battery capacity can be utilized to maintain a high voltage even if the discharge is accelerated. When used by IoT devices, -secondary battery swapping can be used for a long time, greatly reducing the frequency of battery replacement. Improved data collection stability and system reliability, reducing management costs.

*Pulse discharge condition at 323°C for 35mA for 3 seconds and 33 seconds to stop

Scope of application: High-current batteries are used in logistics and asset management tracking equipment, outdoor infrastructure, FA control equipment, environmental monitoring sensors, etc. using LPWA (Low Power Wide Area) communication methods such as "LoRa" and "SIGFOX".

Scope of application: Large current battery is used for logistics • asset management tracking equipment, outdoor infrastructure, FA control equipment, environmental monitoring sensors, etc. in the LPWA (Low Power Wide Area) communication mode of "LoRa" and "SIGFOX".